Factory Direct. In Stock & Ships Same Day!
Designed specifically for the KBS HVLP Spray Gun.
The 1.4mm tip set up is ideal for use with base coats, clear coats, single stage, primers and other light to medium and some heavier viscosity paint coating materials. The 1.4 mm is a very universal tip size.
Allows you to buy a single KBS HVLP Spray Gun and then have multiple spray tip sizes.
Professional results at a fraction of the cost!
Select a row below to filter reviews.
5.0
DiamondFinish Clear is a crazy tough Clear Coat that can be applied Direct To Metal or over other coatings. DiamondFinish Clear is a water clear high gloss clear coat that remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.
RustSeal is a high-performance, single part, ready-to-use, rust preventive coating. RustSeal is impervious to road salts and most every chemical. RustSeal flows out to a beautiful, rock-hard, tough ceramic-like coating that is tough to chip or scratch and will not crack or peel.
KBS MAXX is a single stage, high performance, two-component (2K), low VOC, low HAPs, permanently UV stable polyurethane topcoat that can be applied by brush, roller, or sprayer. KBS MAXX is specifically designed for the indoor and outdoor applications including automotive, agricultural, fleet refinishing, marine, and heavy industrial equipment markets.
KBS MAXX Clear is a superior 2K Urethane UV Stable Clear Coat that provides a long lasting and durable finish while keeping its beautiful finish for years.
XTC is a high temperature/heat resistant coating formulated specifically to protect metal surfaces operating at temperatures from 500° F to 1500° F. With proper preparation, XTC provides outstanding adhesion, film integrity, weathering, and thermal shock-resistance throughout this entire temperature range, and is guaranteed not to burn off! Available in 10 great colors.
KBS Top Coater is a superior coating formulated to be brushed, rolled, or sprayed offering maximum coverage and professional looking results. KBS Top Coater is a direct to metal exterior grade coating that adheres permanently to steel and aluminum surfaces. KBS Top Coater is an ideal topcoat paint for RustSeal when the area will be consistently exposed to sunlight. KBS Top Coater is a very high solids paint that does not run or sag and gives at least twice the coverage of conventional paints.
SemperForce black nitrile examination gloves are designed for demanding work environments where your safety and comfort are a must. A textured surface promises secure gripping capabilities. SemperForce black nitrile gloves are ideal for automotive, industrial, tattoo, and cosmetology applications.
KBS #1 Thinner is a Low VOC paint thinner used for the thinning and clean up of RustSeal, DiamondFinish Clear, KBS MAXX, BlackTop, KBS Top Coater, Motor Coater and our other KBS Coatings Paints.
