- Quarts are more convenient than a gallon. Less clean-up. Less Waste.
- Mix and match colors.
- RustSeal is a paint-like substance that acts as a total rust inhibitor and preventive.
- RustSeal has a consistency that is approximately that of paint and it has very good spreadability.
- RustSeal chemically bonds to rusted steel to form a rock-hard, non-porous coating that won't crack chip, or peel.
- RustSeal works by isolating metal from moisture. Without moisture present, steel can't rust.
- RustSeal is highly surface tolerant and capable of adhering to almost any prepared substrate.
*Click HERE for more information on which color of RustSeal you should use.
- High surface tolerance for many different types of applications.
- Apply directly over treated rust.
- Single component formula.
- High solids content. Ideal for Equipment and Machinery.
- Widest array of (11) non-porous color formulas.
- Combines with atmospheric moisture to cure.
- Excellent surface penetration and adhesion.
- Forms permanent non-porous barrier against moisture and oxygen.
- Waterproof coating strengthened by repeated exposure to moisture.
- Mold and mildew resistant
- High abrasion and chemical resistance.
- Repels fuels, oils, most acids & alkalis, and graffiti.
- Will not crack, flake or peel.
- Withstands temps up to 600°F (316°C).
- Brush, roll or spray application.
- Superior flow and leveling.
- Flexible coating allowing expansion and contraction.
- Compatible with all paint systems.
- VOC compliant.
- Lead-Free.
Note: RustSeal is not intended for use as a final finish. Repeated or prolonged exposure to direct UV light will cause cosmetic alteration to its color and sheen. RustSeal’s guaranteed rust protective properties, however, will not degrade. In areas not exposed to direct UV light, like the underside of a car, RustSeal will seal as well as serve as a great looking final finish. To protect against unwanted cosmetic changes, topcoat RustSeal with any opaque (solid color) paint system. Please note that a clear topcoat cannot provide the needed UV protection. Choose the closest color associated RustSeal primer to compliment your topcoat and protect against potential visible surface chips.
Automotive: chassis • floor pans • wheel wells fenders • trunks • engines • suspension parts • axles • roof drains • springs • doors • almost every part on a car except the exhaust!
Marine: engine rooms • hulls • masts • bilges • heat exchangers • decks • chain lockers • pumps • fuel tanks • boat trailers
Industrial: heavy transport • steam pipes • sealing concrete • air conditioning repair • fiberglass repair • rebar coating • steel roof • fuel & waste-water treatment tanks
Household: hand rails • support beams • lawn equipment • garage floors • pipe work • appliances • lead-based paint encapsulation
Note: RustSeal is not intended for use as a final finish. Repeated or prolonged exposure to direct UV light will cause cosmetic alteration to its color and sheen. RustSeal’s guaranteed rust protective properties, however, will not degrade. In areas not exposed to direct UV light, like the underside of a car, RustSeal will seal as well as serve as a great looking final finish. To protect against unwanted cosmetic changes, topcoat RustSeal with any opaque (solid color) paint system. Please note that a clear topcoat cannot provide the needed UV protection. Choose the closest color associated RustSeal primer to compliment your topcoat and protect against potential visible surface chips.
Watch Sam Memmolo use The KBS 3 Step Rust Prevention System to coat a rusty frame.
Check out how we use The KBS 3 Step Rust Prevention System to fix some rust spots on the bottom of our car doors.
