BlackTop - Single Stage 1K Coating - Brush Roll or Spray - UV Stable Top Coat

BlackTop is a permanent, moisture-cured, 1K, single stage, UV stable coating used for bare, painted, or primered surfaces and surfaces previously coated with RustSeal.

BlackTop adheres and bonds to bare metal surfaces - both ferrous and non-ferrous metal surfaces.

BlackTop is an advanced exterior grade rust preventative coating offering lasting protection from the elements.

BlackTop is a long-lasting protective coating which withstands dulling and fading caused by prolonged sunlight exposure.

BlackTop may be used alone as an effective rust preventative coating and can offer the ultimate rust protection when used in combination with RustSeal.

For the best and longest-lasting rust and ultraviolet protection, first apply RustSeal to permanently seal the surface and then topcoat with BlackTop for an incredibly tough and professional looking finish.

BlackTop is available in Gloss Black, OEM Satin Black, and Flat Black.

BlackTop dries to a rock hard, yet flexible coating that can be readily applied to chassis, coil springs, and light weight panels.

BlackTop offers high heat resistance (300-500F) and can be applied to almost all automotive applications except exhaust systems.

BlackTop is available in a convenient Aerosol Spray Can! The BlackTop Aerosol version features a professional grade acrylic lacquer resin system for superior adhesion, color retention, and durability.

Satisfaction guaranteed!

• Single component (1K) formula.
• Single Stage Coating. No need for a separate clear coat.
• Moisture Cured Urethane resin system which is an advanced coatings technology offering durability, flexibility, corrosion prevention, rust prevention, and chemical resistance.
• Permanent UV stability: No chalking or fading.
• Rock hard permanent topcoat.
• Flexible coating which expands and contracts.
• High temp resistance: 500F for non-aerosol; 300F for aerosol
• Apply by brush, roller, or sprayer.
• Incredible flow and leveling.
• Available in a convenient Aerosol Can.
• Aerosol Version features a professional grade acrylic lacquer resin system for superior adhesion, color retention, and durability.
• Shelf Life: At least 2 years when unopened from date of purchase. After opening, when the directions for use and storage are followed, typically 6 months. Always store in a cool, dry place.

NOTE: If you are unsure of what sheen of BlackTop you want, please request an actual color sample HERE.

Gloss Levels: Gloss (85-95%), OEM Satin (55-65%), Flat Black (15-20%)

BlackTop Applications

Automotive and Truck Chassis • Car Frames • Truck Frames • Car Bumpers • Car Trim • Engine Compartments • Engine Firewall • Suspension Components • Floor Pans & Trunks • Wheels & Rims • Dump Trucks • Car Trailers • Boat Trailers • Utility Trailers • Wrought Iron Railings • Fire Escapes

BlackTop Coverage

Theoretical coverage at 2 mils dry film thickness is 400 sq.ft. per gallon. Material losses during mixing and application will vary and must be taken into consideration. Expect up to 50% less coverage on bare wood, rough, coarse, or sandblasted surfaces.

Aerosol: 38 sq. ft.
8oz: 25 sq. ft.
Pint: 50 sq. ft.
Quart: 100 sq. ft.
Gallon: 400 sq. ft.
5 Gallon: 2000 sq. ft.

Volume Solids: 62.5 +/- 2.0%

Weight Solids: 67.8 +/- 2.0%

Weight Per Gallon (Varies by Sheen): 8.72 +/- 0.5 lbs/gallon

Viscosity: 27 - 33 seconds #2 Zahn cup

QUV 313B: 1000 hours

Pencil Hardness: 5H @ 96 Hours

10% Sodium Hydroxide: Excellent

Impact Direct/Indirect: 160 inch-pounds

Salt Spray (B117): Q-Steel coated at 4-5 mils dft: 1000 hrs

Salt Spray (B117): Q-Steel primed with two coats RustSeal and one coat BlackTop 4-5 mils dft total: 2000 hrs