RustSeal Gloss Black Quart - Automotive and Industrial Rust Prevention Paint

• Surface Tolerant: Apply directly over treated rust and bare metal.
• 1K Formula: Ready-to-use, single component.
• Moisture Cured: Strengthens with exposure to humidity.
• Deep Penetration: Superior adhesion to bare metal, galvanized steel, and other substrates.
• Non-Porous: Creates a permanent barrier against moisture and oxygen.

• Chemical Resistant: Repels fuels, oils, acids, and alkalis.
• High Heat: Withstands temperatures up to 600°F (315°C).
• Flexible: Will not crack, flake, or peel under expansion.
• Long Shelf Life: 2+ years unopened; 6 months after opening, stored in a cool, dry place.

Typical Applications

Automotive

frames, chassis, floor pans, wheel wells, fenders, trunks, firewalls, engines, suspension parts, axles, roof drains, leaf springs, coil springs, doors, almost every part on a car except the exhaust!

Marine

engine rooms, hulls. masts, bilges, heat exchangers, decks, chain lockers, pumps, fuel tanks, boat trailers

Industrial

heavy transport, steam pipes, sealing concrete, air conditioning repair, fiberglass repair, re-bar coating, steel roof, fuel & waste-water treatment tanks

Household

steam radiators, hand rails, support beams, lawn equipment, garage floors, pipes, appliances, lead-based paint encapsulation, basement walls

Coverage & Yield Guide

Theoretical coverage at 2 mils dry film thickness is 400 sq.ft. per gallon.

Recommended thickness of at least 4-5 mils dry film thickness requires at least two full coats.

For marine type applications or applications where the surface is consistently exposed to water, at least three coats is recommended.

Material losses during mixing and application will vary and must be taken into consideration. Please expect up to 30-40% less coverage on bare wood, rough, or sandblasted surfaces.